Paper feeding unit for a closed tray or peel board line.

Will feed paper onto the empty tray simultaneously as the tray is transported out through the corner.
The products are placed on the tray immediately after paper feeding.
The capacity depends on i.e. the tray dimensions, for example 350 trays per hour.
The baking paper is released from the roll (1), cut and placed onto the tray.
Length (L) of the tray, for example 800 - 2000 mm. Width of the tray/paper for example 400 - 800 mm.
In one single 700 mm paper roll there is more than 7 km paper. The paper used for this purpose is generally silicone covered on both sides (41 g/m2).